Het lukt me maar niet om twee mandriva's (2007) met elkaar te laten kletsen

het hoeft niet met Samba

SMB.CONF (vaste pc)
  
[global]
    
    # 1. Server Naming Options:
    # workgroup = NT-Domain-Name or Workgroup-Name
    workgroup = MDKGROUP
    
    # netbios name is the name you will see in "Network Neighbourhood",
    # but defaults to your hostname
    #  netbios name = <name_of_this_server>
    
    # server string is the equivalent of the NT Description field
    server string = Samba Server %v
    
    # Message command is run by samba when a "popup" message is sent to it.
    # The example below is for use with LinPopUp:
  ; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s
    
    # 2. Printing Options:
    # CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
    # (as cups is now used in linux-mandrake 7.2 by default)
    # if you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    printcap name = cups
    load printers = yes
    
    # printcap cache time, so samba will automatically load new cups printers
    printcap cache time = 60
    
    # It should not be necessary to spell out the print system type unless
    # yours is non-standard. Currently supported print systems include:
    # bsd, sysv, plp, lprng, aix, hpux, qnx, cups
    printing = cups
    
    # Samba 2.2 supports the Windows NT-style point-and-print feature. To
    # use this, you need to be able to upload print drivers to the samba
    # server. The printer admins (or root) may install drivers onto samba.
    # Note that this feature uses the print$ share, so you will need to
    # enable it below.
    # Printer admins are now defined by granting the SePrintOperatorPrivilege, ie:
    # run: net rpc rights grant 'DOMAIN\Printer Operators' SePrintOperatorPrivilege
    
    # 3. Logging Options:
    # this tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/%m.log
    
    # Put a capping on the size of the log files (in Kb).
    max log size = 50
    
    # Set the log (verbosity) level (0 <= log level <= 10)
    # log level = 3
    
    # 4. Security and Domain Membership Options:
    # This option is important for security. It allows you to restrict
    # connections to machines which are on your local network. The
    # following example restricts access to two C class networks and
    # the "loopback" interface. For more examples of the syntax see
    # the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
    # not work for all the hosts in your network.
    #   hosts allow = 192.168.1. 192.168.2. 127.
    
    # Uncomment this if you want a guest account, you must add this to /etc/passwd
    # otherwise the user "nobody" is used
    #  guest account = pcguest
    # Allow users to map to guest:
    map to guest = bad user
    
    # Security mode. Most people will want user level security. See
    # security_level.txt for details.
    security = user
    # Use password server option only with security = server or security = domain
    # When using security = domain, you should use password server = *
    #   password server = <NT-Server-Name>
    #   password server = *
    
    # Password Level allows matching of _n_ characters of the password for
    # all combinations of upper and lower case.
    #  password level = 8
    #  username level = 8
    
    # You may wish to use password encryption. Please read
    # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
    # Do not enable this option unless you have read those documents
    # Encrypted passwords are required for any use of samba in a Windows NT domain
    # The smbpasswd file is only required by a server doing authentication, thus
    # members of a domain do not need one.
    encrypt passwords = yes
    smb passwd file = /etc/samba/smbpasswd
    
    # The following are needed to allow password changing from Windows to
    # also update the Linux system password.
    # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
    # NOTE2: You do NOT need these to allow workstations to change only
    #        the encrypted SMB passwords. They allow the Unix password
    #        to be kept in sync with the SMB password.
  ;  unix password sync = Yes
    # You either need to setup a passwd program and passwd chat, or
    # enable pam password change
  ;  pam password change = yes
    #  passwd program = /usr/bin/passwd '%u'
  ;  passwd chat = *New*UNIX*password* %n\n *Re*ype*new*UNIX*password* %n\n \
  ;*passwd:*all*authentication*tokens*updated*successfully*
    
    # Unix users can map to different SMB User names
  ;  username map = /etc/samba/smbusers
    
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    #   include = /etc/samba/smb.conf.%m
    
    # Options for using winbind. Winbind allows you to do all account and
    # authentication from a Windows or samba domain controller, creating
    # accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's
    # and gid's. winbind uid and winbind gid are the only required parameters.
    #
    # winbind uid is the range of uid's winbind can use when mapping RIDs to uid's
    #  idmap uid = 10000-20000
    #
    # winbind gid is the range of uid's winbind can use when mapping RIDs to gid's
    #  idmap gid = 10000-20000
    #
    # winbind separator is the character a user must use between their domain
    # name and username, defaults to "\"
    #  winbind separator = +
    #
    # winbind use default domain allows you to have winbind return usernames
    # in the form user instead of DOMAIN+user for the domain listed in the
    # workgroup parameter.
    #  winbind use default domain = yes
    #
    # template homedir determines the home directory for winbind users, with
    # %D expanding to their domain name and %U expanding to their username:
    #  template homedir = /home/%D/%U
    
    # When using winbind, you may want to have samba create home directories
    # on the fly for authenticated users. Ensure that /etc/pam.d/samba is
    # using 'service=system-auth-winbind' in pam_stack modules, and then
    # enable obedience of pam restrictions below:
    #  obey pam restrictions = yes
    
    #
    # template shell determines the shell users authenticated by winbind get
    #  template shell = /bin/bash
    
    # 5. Browser Control and Networking Options:
    # Most people will find that this option gives better performance.
    # See speed.txt and the manual pages for details
    socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
    
    # Configure Samba to use multiple interfaces
    # If you have multiple network interfaces then you must list them
    # here. See the man page for details.
    #   interfaces = 192.168.12.2/24 192.168.13.2/24
    
    # Configure remote browse list synchronisation here
    #  request announcement to, or browse list sync from:
    #       a specific host or from / to a whole subnet (see below)
    #   remote browse sync = 192.168.3.25 192.168.5.255
    # Cause this host to announce itself to local subnets here
    #   remote announce = 192.168.1.255 192.168.2.44
    
    # set local master to no if you don't want Samba to become a master
    # browser on your network. Otherwise the normal election rules apply
    #   local master = no
    
    # OS Level determines the precedence of this server in master browser
    # elections. The default value should be reasonable
    #   os level = 33
    
    # Domain Master specifies Samba to be the Domain Master Browser. This
    # allows Samba to collate browse lists between subnets. Don't use this
    # if you already have a Windows NT domain controller doing this job
    #   domain master = yes
    
    # Preferred Master causes Samba to force a local browser election on startup
    # and gives it a slightly higher chance of winning the election
    #   preferred master = yes
    
    # 6. Domain Control Options:
    # Enable this if you want Samba to be a domain logon server for
    # Windows95 workstations or Primary Domain Controller for WinNT and Win2k
    #   domain logons = yes
    
    # if you enable domain logons then you may want a per-machine or
    # per user logon script
    # run a specific logon batch file per workstation (machine)
    #   logon script = %m.bat
    # run a specific logon batch file per username
    #   logon script = %u.bat
    
    # Where to store roaming profiles for WinNT and Win2k
    #        %L substitutes for this servers netbios name, %u is username
    #        You must uncomment the [Profiles] share below
    #   logon path = \\%L\Profiles\%u
    
    # Where to store roaming profiles for Win9x. Be careful with this as it also
    # impacts where Win2k finds it's /HOME share
    # logon home = \\%L\%u\.profile
    
    
    # The add user script is used by a domain member to add local user accounts
    # that have been authenticated by the domain controller, or when adding
    # users via the Windows NT Tools (ie User Manager for Domains).
    
    # Scripts for file (passwd, smbpasswd) backend:
    # add user script = /usr/sbin/useradd -s /bin/false '%u'
    # delete user script = /usr/sbin/userdel '%s'
    # add user to group script = /usr/bin/gpasswd -a '%u' '%g'
    # delete user from group script = /usr/bin/gpasswd -d '%u' '%g'
    # set primary group script = /usr/sbin/usermod -g '%g' '%u'
    # add group script = /usr/sbin/groupadd %g && getent group '%g'|awk -F: '{print $3}'
    # delete group script = /usr/sbin/groupdel '%g'
    
    # Scripts for LDAP backend (assumes nss_ldap is in use on the domain controller,
    # and needs configuration in smbldap_conf.pm
    # add user script = /usr/sbin/smbldap-useradd -m '%u'
    # delete user script = /usr/sbin/smbldap-userdel '%u'
    # add user to group script = /usr/sbin/smbldap-groupmod -m '%u' '%g'
    # delete user from group script = /usr/sbin/smbldap-groupmod -x '%u' '%g'
    # set primary group script = /usr/sbin/smbldap-usermod -g '%g' '%u'
    # add group script = /usr/sbin/smbldap-groupadd '%g' && /usr/sbin/smbldap-groupshow %g|awk '/^gidNumber:/ {print $2}'
    # delete group script = /usr/sbin/smbldap-groupdel '%g'
    
    
    # The add machine script is use by a samba server configured as a domain
    # controller to add local machine accounts when adding machines to the domain.
    # The script must work from the command line when replacing the macros,
    # or the operation will fail. Check that groups exist if forcing a group.
    # Script for domain controller for adding machines:
    # add machine script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false -M '%u'
    # Script for domain controller with LDAP backend for adding machines (please
    # configure in /etc/samba/smbldap_conf.pm first):
    # add machine script = /usr/sbin/smbldap-useradd -w -d /dev/null -c 'Machine Account' -s /bin/false '%u'
    
    # Domain groups:
    # Domain groups are now configured by using the 'net groupmap' tool
    
    # Enable priveleges, ie allowing members of Domain Admins to join machines
    # to the domain
    # enable privileges = yes
    
    # Samba Password Database configuration:
    # Samba now has runtime-configurable password database backends. Multiple
    # passdb backends may be used, but users will only be added to the first one
    # Default:
    # passdb backend = smbpasswd guest
    # TDB backen with fallback to smbpasswd and guest
    # passdb backend = tdbsam smbpasswd guest
    # LDAP with fallback to smbpasswd guest
    # Enable SSL by using an ldaps url, or enable tls with 'ldap ssl' below.
    # passdb backend = ldapsam:ldaps://ldap.mydomain.com smbpasswd guest
    # Use the samba2 LDAP schema:
    # passdb backend = ldapsam_compat:ldaps://ldap.mydomain.com smbpasswd guest
    
    # Idmap settings (set idmap uid and idmap gid above):
    # Idmap backend to use:
    # idmap backend = ldap:ldap://ldap.mydomain.com
    
    # LDAP configuration for Domain Controlling:
    # The account (dn) that samba uses to access the LDAP server
    # This account needs to have write access to the LDAP tree
    # You will need to give samba the password for this dn, by
    # running 'smbpasswd -w mypassword'
    # ldap admin dn = cn=root,dc=mydomain,dc=com
    # ldap ssl = start_tls
    # start_tls should run on 389, but samba defaults incorrectly to 636
    # ldap port = 389
    # ldap suffix = dc=mydomain,dc=com
    # Seperate suffixes are available for machines, users, groups, and idmap, if
    # ldap suffix appears first, it is appended to the specific suffix.
    # Example for a unix-ish directory layout:
    # ldap machine suffix = ou=Hosts
    # ldap user suffix = ou=People
    # ldap group suffix = ou=Group
    # ldap idmap suffix = ou=Idmap
    # Example for AD-ish layout:
    # ldap machine suffix = cn=Computers
    # ldap user suffix = cn=Users
    # ldap group suffix = cn=Groups
    # ldap idmap suffix = cn=Idmap
    
    
    # 7. Name Resolution Options:
    # All NetBIOS names must be resolved to IP Addresses
    # 'Name Resolve Order' allows the named resolution mechanism to be specified
    # the default order is "host lmhosts wins bcast". "host" means use the unix
    # system gethostbyname() function call that will use either /etc/hosts OR
    # DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
    # and the /etc/resolv.conf file. "host" therefore is system configuration
    # dependant. This parameter is most often of use to prevent DNS lookups
    # in order to resolve NetBIOS names to IP Addresses. Use with care!
    # The example below excludes use of name resolution for machines that are NOT
    # on the local network segment
    # - OR - are not deliberately to be known via lmhosts or via WINS.
    # name resolve order = wins lmhosts bcast
    
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
    #   wins support = yes
    
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    #       Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    #   wins server = w.x.y.z
    
    # WINS Proxy - Tells Samba to answer name resolution queries on
    # behalf of a non WINS capable client, for this to work there must be
    # at least one  WINS Server on the network. The default is NO.
    #   wins proxy = yes
    
    # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
    # via DNS nslookups. The built-in default for versions 1.9.17 is yes,
    # this has been changed in version 1.9.18 to no.
    dns proxy = no

# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
#  preserve case = no
#  short preserve case = no
# Default case is normally upper case for all DOS files
#  default case = lower
# Be very careful with case sensitivity - it can break things!
#  case sensitive = no

# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
# 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian),
# 936 (Japanese - Shift-JIS), 936 (Simpl. Chinese), 949 (Korean Hangul),
# 950 (Trad. Chin.).
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
# This is an example for french users:
#   dos charset = 850
#   unix charset = ISO8859-1


#============================ Share Definitions ==============================
[homes]
    comment = Home Directories
    browseable = no
    writable = yes
# You can enable VFS recycle bin and on-access virus-scanning on a per
# share basis:
# Uncomment the next 2 lines (make sure you create a .recycle folder in
# the base of the share and ensure all users will have write access to it.
# For virus scanning, install samba-vscan-clamav and ensure the clamd service
# is running
#   vfs objects = vscan-clamav recycle
#   vscan-clamav: config-file = /etc/samba/vscan-clamav.conf

# Un-comment the following and create the netlogon directory for Domain Logons
# [netlogon]
#   comment = Network Logon Service
#   path = /var/lib/samba/netlogon
#   guest ok = yes
#   writable = no

#Uncomment the following 2 lines if you would like your login scripts to
#be created dynamically by ntlogon (check that you have it in the correct
#location (the default of the ntlogon rpm available in contribs)
#root preexec = /usr/bin/ntlogon -u '%u' -g '%g' -o %a -d /var/lib/samba/netlogon/
#root postexec = rm -f '/var/lib/samba/netlogon/%u.bat'

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
#[Profiles]
#    path = /var/lib/samba/profiles
#    browseable = no
#    guest ok = yes
#    writable = yes
# This script can be enabled to create profile directories on the fly
# You may want to turn off guest acces if you enable this, as it
# hasn't been thoroughly tested.
#root preexec = PROFILE='/var/lib/samba/profiles/%u'; if [ ! -e $PROFILE ]; \
#                then mkdir -pm700 $PROFILE; chown '%u':'%g' $PROFILE;fi
# If you want read-only profiles, fake permissions so windows clients think
# they have written to the files
# vfs objects = fake_perms

# NOTE: If you have a CUPS print system there is no need to
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients or upload the printer driver to the
# server from Windows (NT/2000/XP). On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you have
# to use 'printcap name = cups' or swap the 'print command' line below
# with the commented one. Note that print commands only work if not using
# 'printing=cups'
[printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    # to allow user 'guest account' to print.
    guest ok = yes
    writable = no
    printable = yes
    create mode = 0700
    # =====================================
    # print command: see above for details.
    # =====================================
    print command = lpr-cups -P %p -o raw %s -r # using client side printer drivers.
    #   print command = lpr-cups -P %p %s # using cups own drivers (use generic PostScript on clients).
    # If you install drivers on the server, you will want to uncomment this so
    # clients request the driver
    use client driver = yes

# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write access
# to the directory and share definition to be able to upload the drivers.
# For more information on this, please see the Printing Support Section of
# /usr/share/doc/samba-<version>/docs/Samba-HOWTO-Collection.pdf
#
# A special case is using the CUPS Windows Postscript driver, which allows
# all features available via CUPS on the client, by publishing the ppd file
# and the cups driver by using the 'cupsaddsmb' tool. This requires the
# installation of the CUPS driver (http://www.cups.org/windows.php)
# on the server, but doesn't require you to use Windows at all :-).
[print$]
    path = /var/lib/samba/printers
    browseable = yes
    write list = @adm root
    guest ok = yes
    inherit permissions = yes
# Settings suitable for Winbind:
# write list = @"Domain Admins" root
# force group = +@"Domain Admins"

# A useful application of samba is to make a PDF-generation service
# To streamline this, install windows postscript drivers (preferably colour)
# on the samba server, so that clients can automatically install them.
# Note that this only works if 'printing' is *not* set to 'cups'

[pdf-gen]
    path = /var/tmp
    guest ok = No
    printable = Yes
    comment = PDF Generator (only valid users)
    printing = bsd
    #print command = /usr/share/samba/scripts/print-pdf file path win_path recipient IP &
    print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
    lpq command = /bin/true

# A share allowing administrators to set ACLs on, or access for backup purposes
# all files (as root).
#[admin]
#  path = /
#  admin users = @"Domain Admins"
#  valid users = @"Domain Admins"
#  browseable = no
#  writeable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba/public
;   public = yes
;   writable = no
;   write list = @staff
# Audited directory through experimental VFS audit.so module:
# Uncomment next line.
#   vfs object = /usr/lib/samba/vfs/audit.so

# Other examples.
#
# A private printer, usable only by Fred. Spool data will be placed in Fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by Fred. Note that Fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765

[Home map]
    path = /home/patrick
[PATRICKDSKTP]
    path = /home/patrick/Desktop
    comment = /home/patrick/Desktop
    browseable = yes
    public = yes
    writable = no

SMB.CONF (laptop)


[global]
    name resolve order = wins lmhosts bcast
    idmap gid = 16777216-33554431
    passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*\n
    preserve case = no
    remote browse sync = 192.168.0.255
    time server = no
    passwd program = /usr/bin/passwd '%u'
    dns proxy = no
    netbios name = samba24
    cups options = raw
    printing = cups
    idmap uid = 16777216-33554431
    logon script = %G.bat
    local master = no
    remote announce = 192.168.0.255
    workgroup = MDKGROUP
    os level = 33
    printcap name = /etc/printcap
    security = user
    max log size = 1000
    log file = /var/log/samba/samba.log
    load printers = yes
    guest account = smbguest
    smb passwd file = /etc/samba/smbpasswd
    username level = 8
    socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
    wins server =
    logon drive = m:
    username map = /etc/samba/smbusers
    null passwords = no
    interfaces = 127.0.0.1/8 192.168.0.0/24
    domain master = no
    encrypt passwords = yes
    winbind use default domain = yes
    wins proxy = no
    logon home = \\%L\homes\%u
    template shell = /dev/null
    wins support = no
    password level = 8
    server string = CAD architects, Stockholm, east 32nd st, 34th floor
    path = /home/patrick
    unix password sync = Yes
    logon path = \\%L\profiles\%u
    add user script = /usr/sbin/useradd -d /dev/null -g sambamachines -c 'Samba Machine Account' -s /dev/null -M %u
    preferred master = no
    domain logons = no
;  short preserve case = no
;  default case = lower
;  case sensitive = no

[netlogon]
    comment = Network Logon Service
    path = /home/netlogon
    read only = no
    available = yes
    browseable = yes
    writable = yes
    guest ok = no
    public = no
    printable = no
    share modes = no
    locking = no

[profiles]
    comment = User Profiles
    path = /home/profiles
    read only = no
    available = yes
    browseable = no
    writable = yes
    guest ok = no
    public = no
    printable = no
    locking = no
    create mode = 0600
    directory mask = 0700

[printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = yes
    writable = no
    guest ok = no
    public = no
    printable = yes
    share modes = no
    locking = no

[pdf-documents]
    path = /home/pdf-documents
    comment = Converted PDF Documents
    available = yes
    browseable = yes
    writeable = yes
    guest ok = yes

[pdf-printer]
    path = /tmp
    comment = PDF Printer Service
    printable = yes
    guest ok = yes
    use client driver = yes
    printing = bsd
    print command = /usr/bin/gsambadpdf %s %u
    lpq command =
    lprm command =
[homes]
    path = /home
    comment = Home Directories
    browseable = yes
    public = yes
    writable = yes
[homefgfggf]
    path = /home/patrick/
    comment = homeh
    browseable = yes
    public = yes
    writable = yes

[home laptop]
    writeable = yes
    write list = patrick

[PATRICKDSKTP]
   path = /home/patrick/Desktop
   comment = /home/patrick/Desktop
   public = yes
   guest ok = yes
   writable = no
   wide links = no

[global]

    # 1. Server Naming Options:
    # workgroup = NT-Domain-Name or Workgroup-Name
    workgroup = GROEPPATRICK

    # netbios name is the name you will see in "Network Neighbourhood",
    # but defaults to your hostname
    netbios name = samba42

    # server string is the equivalent of the NT Description field
    server string = Samba Server %v

    # Message command is run by samba when a "popup" message is sent to it.
    # The example below is for use with LinPopUp:
;    message command = /usr/bin/linpopup "%f" "%m" %s; rm %s

    # 2. Printing Options:
    # CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
    # (as cups is now used in linux-mandrake 7.2 by default)
    # if you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    printcap name = cups
    load printers = yes

    # printcap cache time, so samba will automatically load new cups printers
    printcap cache time = 60

    # It should not be necessary to spell out the print system type unless
    # yours is non-standard. Currently supported print systems include:
    # bsd, sysv, plp, lprng, aix, hpux, qnx, cups
    printing = cups

    # Samba 2.2 supports the Windows NT-style point-and-print feature. To
    # use this, you need to be able to upload print drivers to the samba
    # server. The printer admins (or root) may install drivers onto samba.
    # Note that this feature uses the print$ share, so you will need to
    # enable it below.
    # Printer admins are now defined by granting the SePrintOperatorPrivilege, ie:
    # run: net rpc rights grant 'DOMAIN\Printer Operators' SePrintOperatorPrivilege

    # 3. Logging Options:
    # this tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/%m.log

    # Put a capping on the size of the log files (in Kb).
    max log size = 50

    # Set the log (verbosity) level (0 <= log level <= 10)
    # log level = 3

    # 4. Security and Domain Membership Options:
    # This option is important for security. It allows you to restrict
    # connections to machines which are on your local network. The
    # following example restricts access to two C class networks and
    # the "loopback" interface. For more examples of the syntax see
    # the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
    # not work for all the hosts in your network.
    #   hosts allow = 192.168.1. 192.168.2. 127.

    # Uncomment this if you want a guest account, you must add this to /etc/passwd
    # otherwise the user "nobody" is used
    #  guest account = pcguest
    # Allow users to map to guest:
;    map to guest = bad user

    # Security mode. Most people will want user level security. See
    # security_level.txt for details.
;    security = user
    # Use password server option only with security = server or security = domain
    # When using security = domain, you should use password server = *
    #   password server = <NT-Server-Name>
    #   password server = *

    # Password Level allows matching of _n_ characters of the password for
    # all combinations of upper and lower case.
    #  password level = 8
    #  username level = 8

    # You may wish to use password encryption. Please read
    # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
    # Do not enable this option unless you have read those documents
    # Encrypted passwords are required for any use of samba in a Windows NT domain
    # The smbpasswd file is only required by a server doing authentication, thus
    # members of a domain do not need one.
;    encrypt passwords = yes
    smb passwd file = /etc/samba/smbpasswd

    # The following are needed to allow password changing from Windows to
    # also update the Linux system password.
    # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
    # NOTE2: You do NOT need these to allow workstations to change only
    #        the encrypted SMB passwords. They allow the Unix password
    #        to be kept in sync with the SMB password.
;    unix password sync = Yes
    # You either need to setup a passwd program and passwd chat, or
    # enable pam password change
;    pam password change = yes
    #  passwd program = /usr/bin/passwd '%u'
;    passwd chat = *New*UNIX*password* %n\n *Re*ype*new*UNIX*password* %n\n \
;  *passwd:*all*authentication*tokens*updated*successfully*

    # Unix users can map to different SMB User names
;    username map = /etc/samba/smbusers

    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    #   include = /etc/samba/smb.conf.%m

    # Options for using winbind. Winbind allows you to do all account and
    # authentication from a Windows or samba domain controller, creating
    # accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's
    # and gid's. winbind uid and winbind gid are the only required parameters.
    #
    # winbind uid is the range of uid's winbind can use when mapping RIDs to uid's
    #  idmap uid = 10000-20000
    #
    # winbind gid is the range of uid's winbind can use when mapping RIDs to gid's
    #  idmap gid = 10000-20000
    #
    # winbind separator is the character a user must use between their domain
    # name and username, defaults to "\"
    #  winbind separator = +
    #
    # winbind use default domain allows you to have winbind return usernames
    # in the form user instead of DOMAIN+user for the domain listed in the
    # workgroup parameter.
    #  winbind use default domain = yes
    #
    # template homedir determines the home directory for winbind users, with
    # %D expanding to their domain name and %U expanding to their username:
    #  template homedir = /home/%D/%U

    # When using winbind, you may want to have samba create home directories
    # on the fly for authenticated users. Ensure that /etc/pam.d/samba is
    # using 'service=system-auth-winbind' in pam_stack modules, and then
    # enable obedience of pam restrictions below:
    #  obey pam restrictions = yes

    #
    # template shell determines the shell users authenticated by winbind get
    #  template shell = /bin/bash

    # 5. Browser Control and Networking Options:
    # Most people will find that this option gives better performance.
    # See speed.txt and the manual pages for details
    socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

    # Configure Samba to use multiple interfaces
    # If you have multiple network interfaces then you must list them
    # here. See the man page for details.
    #   interfaces = 192.168.12.2/24 192.168.13.2/24

    # Configure remote browse list synchronisation here
    #  request announcement to, or browse list sync from:
    #       a specific host or from / to a whole subnet (see below)
    #   remote browse sync = 192.168.3.25 192.168.5.255
    # Cause this host to announce itself to local subnets here
    #   remote announce = 192.168.1.255 192.168.2.44

    # set local master to no if you don't want Samba to become a master
    # browser on your network. Otherwise the normal election rules apply
    #   local master = no

    # OS Level determines the precedence of this server in master browser
    # elections. The default value should be reasonable
    #   os level = 33

    # Domain Master specifies Samba to be the Domain Master Browser. This
    # allows Samba to collate browse lists between subnets. Don't use this
    # if you already have a Windows NT domain controller doing this job
    #   domain master = yes

    # Preferred Master causes Samba to force a local browser election on startup
    # and gives it a slightly higher chance of winning the election
    #   preferred master = yes

    # 6. Domain Control Options:
    # Enable this if you want Samba to be a domain logon server for
    # Windows95 workstations or Primary Domain Controller for WinNT and Win2k
    #   domain logons = yes

    # if you enable domain logons then you may want a per-machine or
    # per user logon script
    # run a specific logon batch file per workstation (machine)
    #   logon script = %m.bat
    # run a specific logon batch file per username
    #   logon script = %u.bat

    # Where to store roaming profiles for WinNT and Win2k
    #        %L substitutes for this servers netbios name, %u is username
    #        You must uncomment the [Profiles] share below
    #   logon path = \\%L\Profiles\%u

    # Where to store roaming profiles for Win9x. Be careful with this as it also
    # impacts where Win2k finds it's /HOME share
    # logon home = \\%L\%u\.profile


    # The add user script is used by a domain member to add local user accounts
    # that have been authenticated by the domain controller, or when adding
    # users via the Windows NT Tools (ie User Manager for Domains).

    # Scripts for file (passwd, smbpasswd) backend:
    # add user script = /usr/sbin/useradd -s /bin/false '%u'
    # delete user script = /usr/sbin/userdel '%s'
    # add user to group script = /usr/bin/gpasswd -a '%u' '%g'
    # delete user from group script = /usr/bin/gpasswd -d '%u' '%g'
    # set primary group script = /usr/sbin/usermod -g '%g' '%u'
    # add group script = /usr/sbin/groupadd %g && getent group '%g'|awk -F: '{print $3}'
    # delete group script = /usr/sbin/groupdel '%g'

    # Scripts for LDAP backend (assumes nss_ldap is in use on the domain controller,
    # and needs configuration in smbldap_conf.pm
    # add user script = /usr/sbin/smbldap-useradd -m '%u'
    # delete user script = /usr/sbin/smbldap-userdel '%u'
    # add user to group script = /usr/sbin/smbldap-groupmod -m '%u' '%g'
    # delete user from group script = /usr/sbin/smbldap-groupmod -x '%u' '%g'
    # set primary group script = /usr/sbin/smbldap-usermod -g '%g' '%u'
    # add group script = /usr/sbin/smbldap-groupadd '%g' && /usr/sbin/smbldap-groupshow %g|awk '/^gidNumber:/ {print $2}'
    # delete group script = /usr/sbin/smbldap-groupdel '%g'

    # The add machine script is use by a samba server configured as a domain
    # controller to add local machine accounts when adding machines to the domain.
    # The script must work from the command line when replacing the macros,
    # or the operation will fail. Check that groups exist if forcing a group.
    # Script for domain controller for adding machines:
    # add machine script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false -M '%u'
    # Script for domain controller with LDAP backend for adding machines (please
    # configure in /etc/samba/smbldap_conf.pm first):
    # add machine script = /usr/sbin/smbldap-useradd -w -d /dev/null -c 'Machine Account' -s /bin/false '%u'

    # Domain groups:
    # Domain groups are now configured by using the 'net groupmap' tool

    # Enable priveleges, ie allowing members of Domain Admins to join machines
    # to the domain
    # enable privileges = yes

    # Samba Password Database configuration:
    # Samba now has runtime-configurable password database backends. Multiple
    # passdb backends may be used, but users will only be added to the first one
    # Default:
    # passdb backend = smbpasswd guest
    # TDB backen with fallback to smbpasswd and guest
    # passdb backend = tdbsam smbpasswd guest
    # LDAP with fallback to smbpasswd guest
    # Enable SSL by using an ldaps url, or enable tls with 'ldap ssl' below.
    # passdb backend = ldapsam:ldaps://ldap.mydomain.com smbpasswd guest
    # Use the samba2 LDAP schema:
    # passdb backend = ldapsam_compat:ldaps://ldap.mydomain.com smbpasswd guest

    # Idmap settings (set idmap uid and idmap gid above):
    # Idmap backend to use:
    # idmap backend = ldap:ldap://ldap.mydomain.com

    # LDAP configuration for Domain Controlling:
    # The account (dn) that samba uses to access the LDAP server
    # This account needs to have write access to the LDAP tree
    # You will need to give samba the password for this dn, by
    # running 'smbpasswd -w mypassword'
    # ldap admin dn = cn=root,dc=mydomain,dc=com
    # ldap ssl = start_tls
    # start_tls should run on 389, but samba defaults incorrectly to 636
    # ldap port = 389
    # ldap suffix = dc=mydomain,dc=com
    # Seperate suffixes are available for machines, users, groups, and idmap, if
    # ldap suffix appears first, it is appended to the specific suffix.
    # Example for a unix-ish directory layout:
    # ldap machine suffix = ou=Hosts
    # ldap user suffix = ou=People
    # ldap group suffix = ou=Group
    # ldap idmap suffix = ou=Idmap
    # Example for AD-ish layout:
    # ldap machine suffix = cn=Computers
    # ldap user suffix = cn=Users
    # ldap group suffix = cn=Groups
    # ldap idmap suffix = cn=Idmap

    # 7. Name Resolution Options:
    # All NetBIOS names must be resolved to IP Addresses
    # 'Name Resolve Order' allows the named resolution mechanism to be specified
    # the default order is "host lmhosts wins bcast". "host" means use the unix
    # system gethostbyname() function call that will use either /etc/hosts OR
    # DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
    # and the /etc/resolv.conf file. "host" therefore is system configuration
    # dependant. This parameter is most often of use to prevent DNS lookups
    # in order to resolve NetBIOS names to IP Addresses. Use with care!
    # The example below excludes use of name resolution for machines that are NOT
    # on the local network segment
    # - OR - are not deliberately to be known via lmhosts or via WINS.
    # name resolve order = wins lmhosts bcast

    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
    #   wins support = yes

    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    #       Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    #   wins server = w.x.y.z

    # WINS Proxy - Tells Samba to answer name resolution queries on
    # behalf of a non WINS capable client, for this to work there must be
    # at least one  WINS Server on the network. The default is NO.
    #   wins proxy = yes

    # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
    # via DNS nslookups. The built-in default for versions 1.9.17 is yes,
    # this has been changed in version 1.9.18 to no.
    dns proxy = no

# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
#  preserve case = no
#  short preserve case = no
# Default case is normally upper case for all DOS files
#  default case = lower
# Be very careful with case sensitivity - it can break things!
#  case sensitive = no

# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
# 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian),
# 936 (Japanese - Shift-JIS), 936 (Simpl. Chinese), 949 (Korean Hangul),
# 950 (Trad. Chin.).
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
# This is an example for french users:
#   dos charset = 850
#   unix charset = ISO8859-1


#============================ Share Definitions ==============================
[homes]
    comment = Home Directories
    browseable = yes
    writable = yes
# You can enable VFS recycle bin and on-access virus-scanning on a per
# share basis:
# Uncomment the next 2 lines (make sure you create a .recycle folder in
# the base of the share and ensure all users will have write access to it.
# For virus scanning, install samba-vscan-clamav and ensure the clamd service
# is running
#   vfs objects = vscan-clamav recycle
#   vscan-clamav: config-file = /etc/samba/vscan-clamav.conf

# Un-comment the following and create the netlogon directory for Domain Logons
# [netlogon]
#   comment = Network Logon Service
#   path = /var/lib/samba/netlogon
#   guest ok = yes
#   writable = no

#Uncomment the following 2 lines if you would like your login scripts to
#be created dynamically by ntlogon (check that you have it in the correct
#location (the default of the ntlogon rpm available in contribs)
#root preexec = /usr/bin/ntlogon -u '%u' -g '%g' -o %a -d /var/lib/samba/netlogon/
#root postexec = rm -f '/var/lib/samba/netlogon/%u.bat'

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
#[Profiles]
#    path = /var/lib/samba/profiles
#    browseable = no
#    guest ok = yes
#    writable = yes
# This script can be enabled to create profile directories on the fly
# You may want to turn off guest acces if you enable this, as it
# hasn't been thoroughly tested.
# root preexec = PROFILE='/var/lib/samba/profiles/%u'; if [ ! -e $PROFILE ]; \
#                then mkdir -pm700 $PROFILE; chown '%u':'%g' $PROFILE;fi
# If you want read-only profiles, fake permissions so windows clients think
# they have written to the files
# vfs objects = fake_perms

# NOTE: If you have a CUPS print system there is no need to
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients or upload the printer driver to the
# server from Windows (NT/2000/XP). On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you have
# to use 'printcap name = cups' or swap the 'print command' line below
# with the commented one. Note that print commands only work if not using
# 'printing=cups'
[printers]
    comment = All Printers
    path = /var/spool/samba
    # browseable = no
    # to allow user 'guest account' to print.
    guest ok = yes
    writable = yes
    printable = yes
    create mode = 0700
    # =====================================
    # print command: see above for details.
    # =====================================
    # print command = lpr-cups -P %p -o raw %s -r # using client side printer drivers.
    # print command = lpr-cups -P %p %s # using cups own drivers (use generic PostScript on clients).
    # If you install drivers on the server, you will want to uncomment this so
    # clients request the driver
    # use client driver = yes

# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write access
# to the directory and share definition to be able to upload the drivers.
# For more information on this, please see the Printing Support Section of
# /usr/share/doc/samba-<version>/docs/Samba-HOWTO-Collection.pdf
#
# A special case is using the CUPS Windows Postscript driver, which allows
# all features available via CUPS on the client, by publishing the ppd file
# and the cups driver by using the 'cupsaddsmb' tool. This requires the
# installation of the CUPS driver (http://www.cups.org/windows.php)
# on the server, but doesn't require you to use Windows at all :-).
[print$]
    path = /var/lib/samba/printers
    browseable = yes
;    write list = @adm root
    guest ok = yes
#   inherit permissions = yes
# Settings suitable for Winbind:
# write list = @"Domain Admins" root
# force group = +@"Domain Admins"

# A useful application of samba is to make a PDF-generation service
# To streamline this, install windows postscript drivers (preferably colour)
# on the samba server, so that clients can automatically install them.
# Note that this only works if 'printing' is *not* set to 'cups'

# [pdf-gen]
#    path = /var/tmp
#    guest ok = No
#    printable = Yes
#    comment = PDF Generator (only valid users)
#    printing = bsd
#    print command = /usr/share/samba/scripts/print-pdf file path win_path recipient IP &
#    print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
#    lpq command = /bin/true

# A share allowing administrators to set ACLs on, or access for backup purposes
# all files (as root).
#[admin]
#  path = /
#  admin users = @"Domain Admins"
#  valid users = @"Domain Admins"
#  browseable = no
#  writeable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba/public
;   public = yes
;   writable = no
;   write list = @staff
# Audited directory through experimental VFS audit.so module:
# Uncomment next line.
#   vfs object = /usr/lib/samba/vfs/audit.so

# Other examples.
#
# A private printer, usable only by Fred. Spool data will be placed in Fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by Fred. Note that Fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765

[Home map]
    path = /home/patrick/Documenten
    browseable = yes
    public = yes

[PATRICKDSKTP]
    path = /home/patrick/Desktop
    comment = /home/patrick/Desktop
    browseable = yes
    public = yes
    writable = no

knip-------------------------------------------------knip

flaptop

SMB.CONF (laptop)


[global]
;    name resolve order = wins lmhosts bcast
;    idmap gid = 16777216-33554431
;    passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*\n
;    preserve case = no
;    remote browse sync = 192.168.0.255
;    time server = no
;    passwd program = /usr/bin/passwd '%u'
    dns proxy = no
    netbios name = samba24
;    cups options = raw
    printing = cups
;    idmap uid = 16777216-33554431
;    logon script = %G.bat
;    local master = no
    remote announce = 192.168.0.255
    workgroup = GROEPPATRICK
;    os level = 33
    printcap name = /etc/printcap
;    security = user
    max log size = 100
    log file = /var/log/samba/samba.log
    load printers = yes
    guest account = smbguest
    smb passwd file = /etc/samba/smbpasswd
;    username level = 8
    socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
;    wins server =
;    logon drive = m:
;    username map = /etc/samba/smbusers
;    null passwords = no
    interfaces = 127.0.0.1/8 192.168.0.0/24
;    domain master = no
;    encrypt passwords = yes
;    winbind use default domain = yes
;    wins proxy = no
;    logon home = \\%L\homes\%u
;    template shell = /dev/null
;    wins support = no
;    password level = 8
;    server string = CAD architects, Stockholm, east 32nd st, 34th floor
;    path = /home/patrick
;    unix password sync = Yes
;    logon path = \\%L\profiles\%u
;    add user script = /usr/sbin/useradd -d /dev/null -g sambamachines -c 'Samba Machine Account' -s /dev/null -M %u
;    preferred master = no
;    domain logons = no
;  short preserve case = no
;  default case = lower
;  case sensitive = no

;[netlogon]
;    comment = Network Logon Service
;    path = /home/netlogon
;    read only = no
;    available = yes
;    browseable = yes
;    writable = yes
;    guest ok = no
;    public = no
;    printable = no
;    share modes = no
;    locking = no

;[profiles]
;    comment = User Profiles
;    path = /home/profiles
;    read only = no
;    available = yes
;    browseable = no
;    writable = yes
;    guest ok = no
;    public = no
;    printable = no
;    locking = no
;    create mode = 0600
;    directory mask = 0700

[printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = yes
;    writable = no
;    guest ok = no
;    public = no
;    printable = yes
;    share modes = no
;    locking = no

[pdf-documents]
    path = /home/pdf-documents
    comment = Converted PDF Documents
    available = yes
    browseable = yes
    writeable = yes
    guest ok = yes

;[pdf-printer]
;    path = /tmp
;    comment = PDF Printer Service
;    printable = yes
;    guest ok = yes
;    use client driver = yes
;    printing = bsd
;    print command = /usr/bin/gsambadpdf %s %u
;    lpq command =
;    lprm command =

[homes]
    path = /home/%u
    comment = Home Directories
    browseable = yes
    public = yes
    writable = yes

[homefgfggf]
    path = /home/patrick/Documenten
    comment = homeh
    browseable = yes
    public = yes
    writable = yes

[home laptop]
    writeable = yes
    browseable = yes
;    write list = patrick

[PATRICKDSKTP]
   path = /home/patrick/Desktop
   comment = /home/patrick/Desktop
   public = yes
   guest ok = yes
   writable = no
;   wide links = no